Steelguard

Promac Steelguard™ liquid galvanised coating is a single pack matt zinc rich primer and / or final coat which gives outstanding corrosion resistance due to cathodic protection.

• One component coating ready for use

• Can be applied by brush, roller or spray technique

• High resistance to corrosion in saline environment

• Recommended for long term protection of steel corrosive material

• Based on sacrificial mechanism of corrosion protection targeting reactive zinc corrosion instead of iron

This product will cover approximately 2.5 m² per kg.

Apply one coat Promac Steelguard™ by brush, roller or spray. To be used in a ventilated area. Stir well with a flat paddle or a paddle mixer drill bit until homogenous mass is achieved. The thickness should be adapted according to standard galvanising ASTM-A123 WFT: 75-100 µm, DFT: 25-35 µm at a spreading rate of 2.5 m² per kg. Ambient air affects and determines the drying process, so the time will vary according to the humidity level & temperature.

Clean all tools while wet with mineral turpentine after use.

500 ml, 1 L & 2,5 L